ENGINE COMPARTMENT THREE-DIMENSIONAL DISTANCE
Tech Tips
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Front Fender Installation Nut | M6 (0.24) |
| B, b | Front Spring Support Hole | φ13 (0.51) |
| C, c | Hood Hinge Installation Nut | M8 (0.31) |
| D | Cowl Panel Center Mark | - |
| E, e | Front Side Inner Member Standard Hole | φ15 (0.59) |
| F, f | Headlight Installation Hole | φ11 (0.43) |
| G, g | Radiator Upper Support Installation Nut | M6 (0.24) |
| H, h | Front Bumper Reinforcement Installation Hole | φ16 (0.63) |
| J | Hood Lock Support Brace Installation Nut | M6 (0.24) |
| K, k | Front Side Panel No. 2 Bracket Installation Nut | M6 (0.24) |
| L, l | Radiator Upper Support Installation Nut | M6 (0.24) |
| M, m | Front Fender Installation Nut | M6 (0.24) |
| N, n | Radiator Support Standard Hole | φ8 (0.31) |
| O, o | Front Apron to Cowl Side Upper Member Standard Hole | φ10 (0.39) |
| *1 | Distance between points other than those above |
| *2 | Height from Imaginary Datum Line |
| *3 | mm (in.) |