REAR SUSPENSION CROSSMEMBER THREE-DIMENSIONAL DISTANCE
Tech Tips
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Rear Suspension Member Installation Hole | φ80 (3.15) |
| B, b | Rear Suspension No. 1 Arm Installation Hole | φ12.2 (0.48) |
| C, c | Rear Suspension Member Standard Hole | φ15 (0.59) |
| D, d | Upper Control Rear Arm Installation Hole | φ14.2 (0.56) |
| E, e | Upper Control Rear Arm Installation Hole | φ16.2 (0.64) |
| F, f | Rear Suspension No. 2 Arm Installation Hole | 14.2X19.2 (0.56X0.76) |
| G, g | Rear Suspension Member Installation Hole | φ80 (3.15) |
| *1 | Front |
| *2 | Distance between points other than those above |
| *3 | mm (in.) |