FRONT SUSPENSION CROSSMEMBER(for 2WD) TWO-DIMENSIONAL DISTANCE

Tech Tips


  • Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.


  • In cases in which only one dimension is given, left and right are symmetrical.


  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)

A, a Front Suspension Crossmember Installation Hole φ23 (0.91)
B, b Front Suspension Lower Arm Installation Hole φ14.2 (0.56)
C, c Power Steering Link Installation Hole φ12.2 (0.48)
D, d Front Suspension Lower Arm Installation Hole φ14.2 (0.56)
E, e Engine Mounting Front Insulator Installation Hole φ16 (0.63)
F, f Front Suspension Crossmember Installation Hole φ23 (0.91)
A003QW2E01
*1 Front
*2 mm (in.)
A003QVVE01
*1 Imaginary Datum Line
*2 Height from Imaginary Datum Line
*3 mm (in.)