FRONT FENDER APRON ASSEMBLY REPLACEMENT



  1. REMOVAL

    Symbol Meaning
    A003QW5 Remove Weld Points
    A003QVI Remove Weld Points
    A003QUK Remove Weld Points
    A003QWR Cut with Disc Sander etc.
    A003QWZ Cut and Join Location

      REMOVAL POINT

    1. Bend in the same way as *1.

    A003QWPE01
    A003R0O
    A003R2KE01

  2. INSTALLATION

    Symbol Meaning
    A003R1E Plug Weld
    A003QXJ Plug Weld
    A003QXV Plug Weld
    A003QWZ Cut and Join Location
    A003QYM Fillet Weld
    A003R0H Butt Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. Make sure to attach correctly in accordance with the body dimension diagram as this part affects the front wheel alignment.

    4. Before temporarily installing the new parts, weld the floor crossmember sub-assembly No.3 and front fender apron assembly with the standard number of welding points.

    5. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    6. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A003R2GE01
    A003R23E01
    A003R2P
    A003QWJE01