ABOUT THIS VEHICLE STRUCTURAL OUTLINE
| *1 | Engine Hood | *2 | Front Crush Box |
| *3 | Front Bumper Reinforcement | *4 | Rear Crush Box |
| *5 | Rear Bumper Reinforcement | *6 | No. 2 Member Reinforcement |
| *7 | Front Suspension Member |  |
Aluminum |
 |
980 MPa Ultra High Strength Steel |  |
590 MPa High Strength Steel |
 |
440 MPa High Strength Steel |  |
340 MPa High Strength Steel |
| |
Foamed Sealing Material Application Areas (See the painting / coating) |
|
Adhesive Application Areas |
 |
Laser Welding | - | - |
| |
Laser Screw Welding | |
Spot Welding |
| *1 | for Standard Body: |
| |
Laser Screw Welding | |
Spot Welding |
| *1 | for Standard Body: |
| |
Laser Screw Welding | |
Spot Welding |
| *1 | for Long Body: |
| |
Laser Screw Welding | |
Spot Welding |
| *1 | for Long Body: |