BACK DOOR THREE-DIMENSIONAL DISTANCE
Tech Tips
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Back door hinge installation hole | φ13 (0.51) |
| B, b | Back door damper stay installation nut | M8 (0.31) |
| C, c | Quarter panel extension standard hole | φ10 (0.39) |
| D, d | Tail gate lock striker installation nut | M8 (0.31) |
| E, e | Lower back panel No. 1 gusset corner | - |
| F, f | Tail gate hinge installation nut | M8 (0.31) |
| G, g | Rear floor pan standard hole | φ45 (1.77) |
| H, h | Center body pillar assembly mark | - |
| *a | Vehicle Dimensions | *b | mm (in.) |