CAB MOUNTING NO.1 BRACKET ASSEMBLY REPLACEMENT



  1. REMOVAL

    Symbol Meaning
    A002Y5D Cut with Disc Sander etc.
    A002Y7L

  2. INSTALLATION

    Symbol Meaning
    A002YEE Fillet Weld

      INSTALLATION POINT

    1. Make sure that proper welding can be performed by setting up the welding conditions as necessary before performing work.

    2. Before installing the cab mounting No. 1 brackets, set the cab (upper body) on the vehicle frame and confirm the cab mounting No. 1 brackets' installation positions.

    3. To prevent heat deformation, weld the right and left side of each part before continuing to the next part.

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A002YDVC01
    *a mm (in.) - -