ROOF PANEL(for Sliding Roof) ASSEMBLY REPLACEMENT

A002Y6I

  1. REMOVAL

    Symbol Meaning
    A002Y4P Remove Weld Points

      REMOVAL POINT

    1. If reusing the roof panel reinforcement, trim the hemming location using a disc sander, etc.

    A002Y74C01
    *a Disc Sander - -

  2. INSTALLATION

    Symbol Meaning
    A002YAM Plug Weld
    A002Y5H Body Sealer

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. After the roof panel reinforcement is welded to the new parts, install the roof panel to the vehicle side.

    4. Before temporarily installing the new parts, apply body sealer to the windshield header panel, roof panel reinforcement and back door opening frame.

      Tech Tips

      Apply just enough sealer for the new parts to make contact.

    5. After welding, apply body sealer to the corresponding parts. (See the painting / coating)

    6. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A002YGBC01
    *a Wooden Hammer *b Cloth Tape