QUARTER PANEL EXTENSION CUT AND JOIN REPLACEMENT SECTIONS



  1. REMOVAL / INSTALLATION

    Symbol Meaning
    A002YB3 Remove Weld Points
    A002YDL Cut and Join Location
    A002YAM Plug Weld
    A002Y5X Plug Weld
    A002YEU Butt Weld

      REMOVAL POINT

    1. Remove the spare wheel carrier at the same time.


      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram)

    3. *a is only for installation.

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A002YD1C01
    *A RH: w/ Tire Carrier - -
    *1 Fuel Tank Mounting Rear Bracket *2 Back Door Side Stopper Female Reinforce
    *3 Spare Wheel Carrier - -
    *b mm (in.) - -