BACK DOOR OPENING TROUGH ASSEMBLY REPLACEMENT



  1. REMOVAL / INSTALLATION

    Symbol Meaning
    A002Y4P Remove Weld Points
    A002YE4 Remove Weld Points
    A002YB3 Remove Weld Points
    A002YAM Plug Weld
    A002YCB Plug Weld
    A002Y5X Plug Weld

      REMOVAL POINT

    1. Remove the door lock striker retainer and spare wheel bracket upper reinforcement at the same time.


      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. *a is only for installation.

    4. After welding, apply body sealer to the corresponding parts. (See the painting / coating)

    5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A002Y5ZC01
    *A RH: w/ Tire Carrier - -
    *1 Door Lock Striker Retainer *2 Back Door Opening Lower Reinforcement
    *3 Spare Wheel Bracket Upper Reinforcement - -
    A002YDD