ROCKER REAR PANEL CUT AND JOIN REPLACEMENT SECTIONS

A002Y7F

  1. REMOVAL

    Symbol Meaning
    A002Y4P Remove Weld Points
    A002YDL Cut and Join Location
    A002YGJ Cut Location for Supply Parts

      REMOVAL POINT

    1. After removing the quarter panel, remove the rocker panel No. 3 reinforcement.

    A002Y9NC01
    *1 Quarter Panel - -
    *a mm (in.) - -

  2. INSTALLATION

    Symbol Meaning
    A002YEH Spot Weld
    A002YAM Plug Weld
    A002YEU Butt Weld
    A002Y5H Body Sealer

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. Before installing a new part, apply body sealer.

      Tech Tips

      Apply sealer in an even, continuous bead.

    4. After welding the rocker panel No. 3 reinforcement to the vehicle side, install the quarter panel.

    5. After welding, apply body sealer to the corresponding parts. (See the painting / coating)

    6. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A002YCGC01
    *1 Quarter Panel - -