ROCKER PANEL CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)

A002YFI

  1. REMOVAL

    Symbol Meaning
    A002Y4P Remove Weld Points
    A002YDL Cut and Join Location
    A002YGJ Cut Location for Supply Parts

      REMOVAL POINT

    1. After removing the center body outer pillar, remove the rocker outer panel.

    2. Carefully cut the rocker outer panel so not to damage *a.

    A002Y7UC01
    *1 Center Body Outer Pillar - -
    *b mm (in.) - -

  2. INSTALLATION

    Symbol Meaning
    A002YEH Spot Weld
    A002YAM Plug Weld
    A002YEU Butt Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. After welding the rocker outer panel to the vehicle side, install the center body outer pillar.

    3. After welding, apply body sealer to the corresponding parts. (See the painting / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A002YCRC01
    *1 Center Body Outer Pillar - -