BACK DOOR THREE-DIMENSIONAL DISTANCE
Tech Tips
-
Point F, f on the vehicle are asymmetrical.
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Back Door Hinge Installation Hole | φ16 (0.63) |
| B, b | Back Door Stay Installation Nut | M6 (0.24) |
| C, c | Back Door Opening Reinforcement/Back Door Opening Reinforcement Lower Adjoining Portion | - |
| D, d | Quarter Panel Standard Hole | φ13 (0.51) |
| E, e | Back Door Opening Reinforcement Lower/Body Lower Back Panel Reinforcement Adjoining Portion | - |
| F, f | Back Door Lock Installation Nut | M6 (0.24) |
| G, g | Rear Suspension Installation Hole | φ25.5 (1.00) |
| H, h | Rear Absorber Mounting Bracket Standard Hole | φ10 (0.39) |
| J | Center Floor Pan Standard Hole | φ10 (0.39) |
| K, k | Center Body Pillar Assembly Mark | - |
| *1 | Distance between points other than those above |
| *2 | mm |
| *3 | (in.) |