ROOF PANEL(w/o Sliding Roof) ASSEMBLY REPLACEMENT

A004UO3

  1. REMOVAL

    Symbol meaning
    B001IVH Remove Weld Points
    B001IXF Remove Weld Points
    A004UMWE01

  2. INSTALLATION

    Symbol meaning
    B001IS7 Spot Weld
    B001IY5 Plug Weld
    B001IVR Plug Weld
    B001ISH Body Sealer

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram)

    3. Before temporarily installing the new parts, apply body sealer to the windshield header panel, roof panel reinforcement and back door opening frame.

      Tech Tips

      Apply just enough body sealer for the new parts to make contact.

    4. After the roof panel reinforcement is welded to the new parts, install the roof panel to the vehicle side.

    5. After welding, apply the foamed sealing material to the corresponding parts. (See the paint / coating)

    6. After welding, apply body sealer to the corresponding parts. (See the paint / coating)

    7. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A004UJU
    A004UMU