REAR FLOOR SIDE MEMBER ASSEMBLY REPLACEMENT



  1. REMOVAL

    Symbol meaning
    B001IVH Remove Weld Points
    B001IXF Remove Weld Points
    A004UFCE01
    A004UGFE01

  2. INSTALLATION

    Symbol meaning
    B001IY5 Plug Weld
    B001IVR Plug Weld
    B001IYH Assembly Mark

      INSTALLATION POINT

    1. For positioning of the new parts, align the installation standard holes of the rear floor side rear member and the member.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram)

    3. After welding, apply undercoating to the corresponding parts. (See the paint / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A004UK4N01
    A004UMGN01