FRONT SIDE MEMBER CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)



  1. REMOVAL

    Symbol meaning
    B001IVH Remove Weld Points
    B001IXF Remove Weld Points
    B001IUX Cut and Join Location

      REMOVAL POINT

    1. Carefully cut the member so not to damage *1.

      Reference Value
      Area Measurement Area Measurement
      A 80 mm (3.15 in.) B 7 mm (0.28 in.)
    A004UERE01
    A004ULPE01

  2. INSTALLATION

    Symbol meaning
    B001IY5 Plug Weld
    B001IVR Plug Weld
    B001ITX Butt Weld

      INSTALLATION POINT

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram)

    2. After welding, apply body sealer and undercoating to the corresponding parts. (See the paint / coating)

    3. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A004UJ5E01
    *1 LH: Front side Member No.2 Reinforcement
    *2 RH: Front side Member No.2 Reinforce
    *3 Front side Member Extension