FRONT SUSPENSION CROSSMEMBER THREE-DIMENSIONAL DISTANCE
Tech Tips
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Lower control arm installation hole | φ17.5 (0.689) |
| B, b | Front suspension crossmember installation hole | φ36 (1.42) |
| C, c | Front suspension crossmember standard hole | φ12 (0.47) |
| D, d | Power steering tube installation hole | φ17 (0.67) |
| E, e | Lower control arm installation hole | 21X18.5 (0.83X0.728) |
| F, f | Front suspension crossmember installation hole | φ40 (1.57) |
| *A | Front | *B | LH |
| *C | RH | - | - |
| *a | Vehicle Dimensions | *b | Imaginary Datum Line |
| *c | mm (in.) |
- | - |