BACK DOOR OPENING TROUGH(for Wagon) CUT AND JOIN REPLACEMENT SECTIONS



  1. REMOVAL / INSTALLATION

    Symbol Meaning
    A004LLP Remove Weld Points
    A004LBC Remove Weld Points
    A004LD6 Cut and Join Location
    A004LI0 Plug Weld
    A004LIC Plug Weld
    A004LH1 Butt Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. *a is only for installation.

    4. After welding, apply body sealer to the corresponding parts. (See the painting/coating)

    5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A004LC4C01
    *b mm (in.) - -