CENTER BODY PILLAR(for Sedan) CUT AND JOIN REPLACEMENT SECTIONS

A004LJR

  1. REMOVAL

    Symbol Meaning
    A004LLP Remove Weld Points
    A004LBC Remove Weld Points
    A004LD6 Cut and Join Location
    A004LHP Cut Location for Supply Parts

      REMOVAL POINT

    1. Carefully cut the rocker outer reinforce so not to damage *a.

    2. *b is reused.

    A004LBFC01
    *c mm (in.) - -
    A004LH9C01
    *c mm (in.) - -

  2. INSTALLATION

    Symbol Meaning
    A004LLP Remove Weld Points
    A004LEG Spot Weld
    A004LI0 Plug Weld
    A004LIC Plug Weld
    A004LD6 Cut and Join Location
    A004LDZ Fillet Weld
    A004LH1 Butt Weld

      INSTALLATION POINT

    1. Carefully cut the rocker outer reinforce so not to damage *a.

    2. Before temporarily installing the new parts, weld the rocker outer reinforce, center body pillar reinforcement and center body pillar lower reinforce with the standard number of welding points.

    3. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    4. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    5. After welding the rocker outer reinforce, center body pillar reinforcement and center body pillar lower reinforce to the vehicle side, install the rear body front outside panel.

    6. After welding, apply the foamed sealing material to the corresponding parts. (See the painting/coating)

    7. After welding, apply body sealer to the corresponding parts. (See the painting/coating)

    8. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A004LJDC01
    *1 Rocker Outer Reinforce *2 Center Body Pillar Lower Reinforce
    *3 Center Body Pillar Reinforcement - -
    *b mm (in.) - -
    A004LDVC01
    *1 Rocker Outer Reinforce *2 Center Body Pillar Reinforcement
    *3 Center Body Pillar Lower Reinforce *4 Rear Body Front Outside Panel
    *b mm (in.) - -