REAR FLOOR SIDE MEMBER ASSEMBLY REPLACEMENT



  1. REMOVAL / INSTALLATION

    Symbol Meaning
    A004LLP Remove Weld Points
    A004LBC Remove Weld Points
    A004LI0 Plug Weld
    A004LIC Plug Weld
    A004LB6 Assembly Mark

      INSTALLATION POINT

    1. For positioning of the new parts, align the installation standard holes of the rear floor side rear member and the member.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. After welding, apply undercoating to the corresponding parts. (See the painting/coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A004LIJC01
    *A LH *B RH