REAR SUSPENSION CROSSMEMBER TWO-DIMENSIONAL DISTANCE


  1. Anti Vibration Type

    Tech Tips

    For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

    Measuring Point Name
    Symbol Name

    Hole Diameter

    mm (in.)
    A, a Rear suspension member installation hole φ55.2 (2.173)
    B, b Lower control arm installation hole φ12.4 (0.488)
    C, c Stabilizer installation hole φ15 (0.59)
    D, d Lower control arm installation hole φ7 (0.28)
    E, e Rear suspension member installation hole φ67.6 (2.661)
    A005FDFC01
    *A Front *B LH
    *C RH - -
    *a Imaginary Datum Line *b

    mm

    (in.)

  2. Rigid Type

    Tech Tips

    For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

    Measuring Point Name
    Symbol Name

    Hole Diameter

    mm (in.)
    A, a Rear suspension member installation hole φ22 (0.86)
    B, b Lower control arm installation hole φ12.4 (0.488)
    C, c Stabilizer installation hole φ15 (0.59)
    D, d Lower control arm installation hole φ7 (0.28)
    E, e Rear suspension member installation hole

    RH: φ14.5 (0.571)

    LH: 22X14.5

    (0.86X0.571)
    A005F6BC01
    *A Front *B LH
    *C RH - -
    *a Imaginary Datum Line *b

    mm

    (in.)