FRONT SUSPENSION CROSSMEMBER THREE-DIMENSIONAL DISTANCE
Tech Tips
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Front Frame Standard Hole | φ13 (0.51) |
| B, b | Front Frame Installation Hole | φ62 (2.44) |
| C, c | Front Frame Standard Hole | φ13 (0.51) |
| D, d | Front Frame Standard Hole | φ13 (0.51) |
| E, e | Front Frame Standard Hole | φ13 (0.51) |
| F, f | Front Suspension Lower Arm Installation Hole | φ15 (0.59) |
| G, g | Front Frame Installation Hole | φ67.5 (2.66) |
| *1 | Front |
| *2 | Distance between points other than those above |
| *3 | mm |
| *4 | (in.) |