REAR FLOOR PAN ASSEMBLY REPLACEMENT



  1. REMOVAL

    Symbol meaning
    A002LFL Remove Weld Points
    A002LEP Remove Weld Points
    A002L80E01
    *a LH Side:
    *b RH Side:

  2. INSTALLATION

    Symbol meaning
    A002LAF Plug Weld
    A002L8W Plug Weld
    A002LB8 Fillet Weld

      INSTALLATION POINT

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram)

    2. Before temporarily installing the new parts, weld the spare wheel clamp bracket, rear floor pan reinforcement, rear floor pan and weld bolts with the standard number of welding points.

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    Reference Value
    Area Measurement Area Measurement
    *a 295 mm (11.61 in.) *b 741 mm (29.17 in.)
    *c 741 mm (29.17 in.) *d 295 mm (11.61 in.)
    *e 679 mm (26.73 in.) - -
    A002LA8E01
    A002LB5E01
    *1 LH Side:
    *2 RH Side:
    A002LC5E01
    *1 REAR FLOOR CROSSMEMBER
    *2 REAR SIDE EXTENSION