ROCKER REAR PANEL CUT AND JOIN REPLACEMENT SECTIONS



  1. REMOVAL

    Symbol meaning
    A002KKM Remove Weld Points
    A002KOD Cut with Disc Sander etc.

      REMOVAL POINT

    1. *1 is reused.

    A002KK7E02

  2. INSTALLATION

    Symbol meaning
    A002KKA Plug Weld
    A002KOD Cut and Join Location
    A002KLY Butt Weld

      INSTALLATION POINT

    1. If the entire supply part is not needed, remove the part of the supply part that is needed.

    2. Before temporarily installing the new parts, weld the center body pillar reinforce sub-assembly lower and rocker reinforce sub-assembly outer with the standard number of welding points.

    3. After welding the center body pillar reinforce sub-assembly lower and rocker reinforce sub-assembly outer to the vehicle side, install the *1.

    4. After welding, apply body sealer to the corresponding parts. (See the painting / coating)

    5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A002KLIE01
    A002KPWE01