REAR FLOOR SIDE MEMBER ASSEMBLY REPLACEMENT



  1. REMOVAL / INSTALLATION

    Symbol Meaning
    A005FCR Remove Weld Points
    A005FBF Remove Weld Points
    A005F5Z Plug Weld
    A005F7W Plug Weld
    A005F5U Assembly Mark

      INSTALLATION POINT

    1. For positioning of the new parts, align the installation standard holes of the rear floor side rear member and the member.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. After welding, apply undercoating to the corresponding parts. (See the painting/coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A005F8GC01
    *A LH *B RH