REAR FLOOR PAN ASSEMBLY REPLACEMENT



  1. REMOVAL

    Symbol Meaning
    A005FCR Remove Weld Points

      REMOVAL POINT

    1. After removing the rear floor side panel, remove the rear floor pan.

    2. Remove the rear floor pan reinforcement at the same time.

    A005F8YC01
    *A LH Side *B RH Side
    *1 Rear Floor Side Panel - -
    A005FBQC01
    *A LH Side *B RH Side
    *1 Rear Floor Pan Reinforcement - -

  2. INSTALLATION

    Symbol Meaning
    A005F5Z Plug Weld
    A005FE3 Fillet Weld

      INSTALLATION POINT

    1. Before temporarily installing the new parts, weld the spare wheel carrier bracket, rear floor pan reinforcement and weld bolts with the standard number of welding points.

    2. After welding the rear floor pan to the vehicle side, install the rear floor side panel.

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A005F89C01
    *1 Electric Parking Brake: Weld Bolt *2 Wagon: Weld Bolts
    *3 Spare Wheel Carrier Bracket *4 Weld Bolt
    *5 Weld Bolts *6 Rear Floor Pan Reinforcement
    A005F67C01
    *A LH Side *B RH Side
    A005FB2C01
    *A LH Side *B RH Side
    *1 Rear Floor Side Panel - -