BACK DOOR OPENING TROUGH(for Wagon) CUT AND JOIN REPLACEMENT SECTIONS



  1. REMOVAL / INSTALLATION

    Symbol Meaning
    A005FCR Remove Weld Points
    A005FBF Remove Weld Points
    A005F5K Cut and Join Location
    A005F5Z Plug Weld
    A005F7W Plug Weld
    A005F5T Butt Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. *a is only for installation.

    4. After welding, apply body sealer to the corresponding parts. (See the painting/coating)

    5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A005FCVC01
    *b mm (in.) - -