QUARTER PANEL END HOUSING(for Sedan) ASSEMBLY REPLACEMENT



  1. REMOVAL / INSTALLATION

    Symbol Meaning
    A005FCR Remove Weld Points
    A005FBF Remove Weld Points
    A005F5Z Plug Weld
    A005F7W Plug Weld

      REMOVAL POINT

    1. Remove the back door opening trough at the same time.


      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. *a is only for installation.

    4. After welding, apply body sealer to the corresponding parts. (See the painting/coating)

    5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A005FCJC01
    *1 Back Door Opening Trough *2 Side Trim Upper Bracket
    *3 LH : Luggage Compartment Trim No. 2 Bracket *4 RH : Luggage Compartment Trim No. 1 Bracket
    *5 Side Trim Bracket - -