ROCKER OUTER PANEL CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)

A005FAG

  1. REMOVAL

    Symbol Meaning
    A005FCR Remove Weld Points
    A005F5K Cut and Join Location
    A005F9O Cut Location for Supply Parts

      REMOVAL POINT

    1. Reuse *a, as the area of the outer panel that is cut and joined is in front of the supplied part cut position.

    2. After removing the rear body front outside panel, remove the rocker outer reinforce.

    3. Carefully cut the rocker outer reinforce so not to damage *b.

    A005F9GC01
    *1 Rear Body Front Outside Panel *2 Rocker Outer Reinforce
    *c mm (in.) - -

  2. INSTALLATION

    Symbol Meaning
    A005FCR Remove Weld Points
    A005FCY Spot Weld
    A005F5Z Plug Weld
    A005F5K Cut and Join Location
    A005F5T Butt Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Carefully cut the rocker outer reinforce so not to damage *a.

    3. After welding the rocker outer reinforce to the vehicle side, install the rear body front outside panel.

    4. After welding, apply body sealer to the corresponding parts. (See the painting/coating)

    5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A005FASC01
    *1 Rocker Outer Reinforce *2 Rear Body Front Outside Panel
    *b mm (in.) - -