WHEN REMOVING,INSTALLING,REPAIRING OR REPLACING PARTS REPAIR PROCEDURE OF HEADLIGHT ASSEMBLY

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL HEADLIGHT BRACKET LH (for Halogen Headlight)

    Tech Tips


    • If the installation area of the headlight is damaged, use the supply bracket for low-cost repair.

    • Make sure that the headlight is not damaged.


    1. A005F8K

      Remove the 2 screw.

    2. Remove the headlight bracket LH.

    3. Install the headlight bracket LH with the 2 screws.

  2. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER LH (for Halogen Headlight)

    Tech Tips


    • If the installation area of the headlight is damaged, use the supply retainer for low-cost repair.

    • Make sure that the headlight is not damaged.


    1. A005FCB

      Cut off the part shaded in the illustration and smooth with sandpaper.

      Note

      After cutting off the part, place the headlight protector retainer against the bosses and file away the old retainer if it interferes with the installation of the supply retainer.

    2. A005F85

      Install the upper headlight protector retainer LH with the 2 screws.

  3. INSTALL LOWER HEADLIGHT PROTECTOR RETAINER LH (for Halogen Headlight)

    Tech Tips


    • If the installation area of the headlight is damaged, use the supply retainer for low-cost repair.

    • Make sure that the headlight is not damaged.


    1. A005FE1

      Cut off the part shaded in the illustration and smooth with sandpaper.

      Note

      After cutting off the part, place the headlight protector retainer against the bosses and file away the old retainer if it interferes with the installation of the supply retainer.

    2. A005FD1

      Install the lower headlight protector retainer LH with the 2 screws.

  4. INSTALL HEADLIGHT BRACKET LH (for HID Headlight)

    Tech Tips


    • If the installation area of the headlight is damaged, use the supply bracket for low-cost repair.

    • Make sure that the headlight is not damaged.


    1. A005F8K

      Remove the 2 screws.

    2. Remove the headlight bracket LH.

    3. Install the headlight bracket LH with the 2 screws.

  5. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER LH (for HID Headlight)

    Tech Tips


    • If the installation area of the headlight is damaged, use the supply retainer for low-cost repair.

    • Make sure that the headlight is not damaged.


    1. A005FCB

      Cut off the part shaded in the illustration and smooth with sandpaper.

      Note

      After cutting off the part, place the upper headlight protector retainer against the bosses and file away the old retainer if it interferes with the installation of the supply retainer.

    2. A005F85

      Install the upper headlight protector retainer LH with the 2 screws.

  6. INSTALL LOWER HEADLIGHT PROTECTOR RETAINER LH (for HID Headlight)

    Tech Tips


    • If the installation area of the headlight is damaged, use the supply retainer for low-cost repair.

    • Make sure that the headlight is not damaged.


    1. A005FE1

      Cut off the part shaded in the illustration and smooth with sandpaper.

      Note

      After cutting off the part, place the lower headlight protector retainer against the bosses and file away the old retainer if it interferes with the installation of the supply retainer.

    2. A005FD1

      Install the lower headlight protector retainer LH with the 2 screws.