LUGGAGE DOOR THREE-DIMENSIONAL DISTANCE
Tech Tips
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Roof panel corner | - |
| B, b | Quarter panel standard hole | 13X10 (0.51X0.39) |
| C, c | Quarter panel/Upper back reinforcement adjoining portion | - |
| D, d | Quarter panel end housing corner | - |
| E, e | Quarter panel standard hole | φ13 (0.51) |
| F, f | Body lower back reinforcement corner | - |
| G, g | Rear finish plate installation hole | 10X9 (0.39X0.35) |
| H, h | Luggage compartment door lock striker installation nut | M6 (0.24) |
| I, i | Rear shock absorber installation hole | φ24.5 (0.965) |
| J, j | Center body pillar assembly mark | - |
| *a | Vehicle Dimensions | *b | mm (in.) |