FRONT SUSPENSION CROSSMEMBER TWO-DIMENSIONAL DISTANCE

Tech Tips


  • In cases in which only one dimension is given, left and right are symmetrical.


  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)
A, a Front Suspension Lower Arm Installation Hole φ16 (0.63)
B, b Front Suspension Crossmember Installation Hole φ19 (0.75)
C, c Steering Gear Box Installation Hole φ14.5 (0.57)
D, d Front Suspension Crossmember Installation Hole φ17 (0.67)
A0044I0E02
*1 Front
*2 mm (in.)
A0044GXE02
*1 Imaginary Datum Line
*2 Height from Imaginary Datum Line
*3 mm (in.)