BACK DOOR THREE-DIMENSIONAL DISTANCE
Tech Tips
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A | Back Door Hinge Installation Hole | φ8.2 (0.32) |
| a | Back Door Hinge Installation Hole | 8.2X10.2 (0.32X0.40) |
| B, b | Back Door Dumper Stay Installation Nut | M6 (0.24) |
| C, c | Roof Side Inner Panel Corner | - |
| D, d | Roof Side Inner Panel Corner | - |
| E, e | Roof Side Inner Rear Panel Corner | - |
| F, f | Quarter Panel Standard Hole | φ13 (0.51) |
| G, g | Back Door Opening Trough Standard Hole | φ10 (0.39) |
| H, h | Back Door Opening Lower Reinforcement Corner | - |
| J, j | Back Door Lock Striker Installation Nut | M8 (0.31) |
| K, k | Rear Shock Absorber Installation Hole | φ18 (0.71) |
| L, l | Floor Side Rail Standard Hole | φ10 (0.39) |
| M, m | Center Body Pillar Assembly Mark | - |
| *1 | Distance between points other than those above |
| *2 | mm (in.) |