ROOF PANEL(for Glass Roof) ASSEMBLY REPLACEMENT

A003IMD

  1. REMOVAL

    Symbol Meaning
    A0044JV Remove Weld Points
    A003IKBE03
  2. INSTALLATION

    Symbol Meaning
    A0044J5 Spot Weld
    A0044GV Plug Weld
    A0044HB Body Sealer

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. After the roof panel reinforcement is welded to the new parts, install the roof panel rear to the vehicle side.

    4. Before temporarily installing the new parts, apply body sealer to the roof panel reinforcement and back door opening frame.

      Tech Tips

      Apply just enough body sealer for the new parts to make contact.

    5. After welding, apply body sealer to the corresponding parts. (See the painting / coating)

    6. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A003INL
    A003IGOE03
    *1 ROOF PANEL REAR