REAR FLOOR SIDE MEMBER CUT AND JOIN REPLACEMENT SECTIONS



  1. REMOVAL

    Symbol Meaning
    A0044JV Remove Weld Points
    A0044HX Remove Weld Points
    A0044JE Cut and Join Location

      REMOVAL POINT

    1. After removing the floor side rail panel FR, remove the rear floor side member front.

    A003IMVE01

  2. INSTALLATION

    Symbol Meaning
    A0044GV Plug Weld
    A0044K1 Plug Weld
    A0044IA Butt Weld

      INSTALLATION POINT

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    2. After welding the rear floor side member front to the vehicle side, install the floor side rail panel FR.

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A003IFME01
    *1 REAR FLOOR SIDE MEMBER FRONT
    *2 FLOOR SIDE RAIL PANEL FR