BODY PANEL SEALING APPLICATION AREAS


  1. Be sure to apply body sealer to the body panel joints and door edges (tip of outer panel folded part), etc., to waterproof and rustproof them.

    Tech Tips


    • Apply degreasing agent to a clean cloth and clean the sealer application areas.

    • After removing the applied spot sealer from the sealer application areas using thinner or equivalent, rust-proof the areas by applying primer or equivalent. Then apply body sealer.

    • If sealer is unnecessarily applied to an area, apply degreasing agent to a clean cloth and clean off the body sealer immediately.

A0044H1 Flat Finishing A0044IM No Flat Finishing
A003IG5
A003IN8E01
*1 for Standard Roof:
*2 for Glass Roof:
A003IGE
A0044H4
A003IJW