UNDER BODY REFERENCE VALUES THREE-DIMENSIONAL DISTANCE

Tech Tips


  • Measure points with the engine under No.1 cover removed.

  • In cases in which only one dimension is given, left and right are symmetrical.


  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)
A Engine Under Cover Installation Nut M6 (0.24)
B, b Front Side Member Standard Hole φ18 (0.71)
C, c Front Suspension Crossmember Installation Bolt M12 (0.47)
D, d Front Suspension Crossmember Installation Bolt M12 (0.47)
E, e Front Side Inner Rear Member Standard Hole φ18 (0.71)
A003INQE02
*1 Distance between points other than those above
*2 mm (in.)