FRONT SIDE MEMBER CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)



  1. REMOVAL

    Symbol Meaning
    A0044JV Remove Weld Points
    A0044HX Remove Weld Points
    A0044JE Cut and Join Location

      REMOVAL POINT

    1. After removing the *1, remove the member.

    2. Carefully cut the member so not to damage *2.

    Reference Value
    Area Measurement Area Measurement
    *a 30 mm (1.18 in.) *b 310 mm (12.20 in.)
    *c 47 mm (1.85 in.) *d 232 mm (9.13 in.)
    *e 310 mm (12.20 in.) - -
    A003IH3E03
    A003IHBE03
    A003IOGE03

  2. INSTALLATION

    Symbol Meaning
    A0044JV Remove Weld Points
    A0044GV Plug Weld
    A0044K1 Plug Weld
    A0044JE Cut and Join Location
    A0044IA Butt Weld

      INSTALLATION POINT

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    2. Divide a new part of front side member reinforcement in to *1 and *2 at the weld points. After welding the *2 to the vehicle side, install the *1.

    3. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A003ILOE03
    *1 FRONT SIDE MEMBER REINFORCEMENT
    *2 FRONT SIDE MEMBER PLATE OUTER
    A003IMLE03