QUARTER PANEL EXTENSION CUT AND JOIN REPLACEMENT SECTIONS

Info Added 2017-08-29

B000GSY


  1. REMOVAL

    Symbol Meaning
    B003XIE Remove Weld Points
    B003XIL Cut with Disc Sander etc.
    B003XJ8 Cut and Join Location
    B000GRNC02
    *a 50 mm (1.97 in.) - -

  2. INSTALLATION

    Symbol Meaning
    B003XI7 Plug Weld
    B003XJ8 Cut and Join Location
    B003XJ7 Butt Weld

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. If the entire supply part is not needed, remove the part of the supply part that is needed.

      B000GTSC01
      *1 BACK DOOR OPENING SIDE FRAME UPPER - -
      *a 50 mm (1.97 in.) - -

    3. Before temporarily installing the new parts, weld the back door opening side frame upper and back door side stopper retainer with the standard number of welding points.

      B000GKDC01
      *1 BACK DOOR OPENING SIDE FRAME UPPER *2 BACK DOOR SIDE STOPPER RETAINER

    4. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

      B000GQ7

    5. After welding, apply body sealer to the corresponding parts. (See the painting/coating)

    6. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.