FRONT SIDE MEMBER(for TMMT Made) CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)

Info Added 2017-08-29

B000GRO


  1. REMOVAL

    Symbol Meaning
    B003XIE Remove Weld Points
    B003XJ8 Cut and Join Location

    1. Carefully cut the front side member inner so as not to damage A.

      B000GP9C01
      *A LH *B RH
      *1 FRONT SIDE MEMBER INNER - -
      *a 5 mm (0.20 in.) *b 35 mm (1.38 in.)
      *c 20 mm (0.79 in.) - -
      B000GL6C01
      *a 180 mm (7.09 in.) - -

  2. INSTALLATION

    Symbol Meaning
    B003XI7 Plug Weld
    B003XJ7 Butt Weld

    1. Remove A from the new parts.

      B000GSUC01
      *1 FRONT SIDE MEMBER SUB-ASSEMBLY OUTER - -

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

      B000GJ6C01
      *A LH *B RH
      *1 FRONT SIDE MEMBER INNER *2 FRONT BUMPER MOUNTING REINFORCE SUB-ASSEMBLY
      B000GLDC01
      *1 FRONT SIDE MEMBER PLATE OUTER - -

    3. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.