FRONT APRON TO COWL SIDE MEMBER ASSEMBLY REPLACEMENT

Info Added 2017-08-29

B000GI7


  1. REMOVAL

    Symbol Meaning
    B003XIE Remove Weld Points

    1. After removing the front apron to cowl side member lower front and front apron to cowl side member outer front, remove the front apron to cowl side member upper.

      B000GJGC01
      *A LH *B RH
      *1 FRONT APRON TO COWL SIDE MEMBER LOWER FRONT *2 FRONT APRON TO COWL SIDE MEMBER OUTER FRONT
      *3 FRONT APRON TO COWL SIDE MEMBER UPPER - -
      B000GU2

  2. INSTALLATION

    Symbol Meaning
    B003XI7 Plug Weld

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. Weld the front apron to cowl side member upper to the vehicle side.

      B000GL0C01
      *1 FRONT APRON TO COWL SIDE MEMBER UPPER - -

    4. Weld the front apron to cowl side member lower front and front apron to cowl side member outer front to the vehicle side.

      B000GI8C01
      *A LH *B RH
      *1 FRONT APRON TO COWL SIDE MEMBER LOWER FRONT *2 FRONT APRON TO COWL SIDE MEMBER OUTER FRONT
      *3 FRONT APRON TO COWL SIDE MEMBER PLATE *4 FRONT FENDER APRON EXTENSION REINFORCEMENT

    5. After welding, apply body sealer to the corresponding parts. (See the painting/coating)

    6. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.