CAUTION LABEL ATTACHMENT POSITION


  1. After using a degreasing agent to clean the surfaces of the body where the caution labels will be attached, attach the caution labels to the positions shown in the illustration.

    Tech Tips


    • Make sure the caution label is not attached over a spot weld.

    • When attaching the caution label, make sure not to touch the label's adhesive surface.

    • To prevent the edges of the caution label from peeling, apply extra pressure to the label's periphery.

    • If the work area's temperature is 5°C or less, the caution label's adhesive will deteriorate. It is recommended that you heat the label to 20 to 40°C.

A003Q1VE02
for TMC Made
*1 A / C INFORMATION LABEL
*2 COOLANT SYSTEM INFORMATION LABEL
A003PVIE02
for TMC Made
*1 COMPLIANCE PLATE
*2 FUEL INFORMATION LABEL
A003PWME03
A003PTHE02
for 3 Door
*1 TIRE PRESSURE INFORMATION LABEL
*2 SIDE AIRBAG CAUTION LABEL
*3 NAME LABEL
*4 CERTIFICATION REGULATION INFORMATION LABEL
A003Q17E03