NAME PLATE ATTACHMENT POSITION


  1. Heat the double-sided tape remaining on the body with an infrared lamp or equivalent.

    Tech Tips

    Heat the tape to 40 to 60°C for approximately 1 to 2 minutes.

  2. Wipe off the remaining double-sided tape using a clean cloth or equivalent.

    Note

    If a name plate is installed without thoroughly removing the remaining double-sided tape from the body, the name plate will not adhere properly. Make sure to thoroughly wipe off the double-sided tape.

  3. After cleaning the installation area of the body with degreasing agent, attach the name plate to the position shown in the illustration.

    Tech Tips

    The working environment should be 20°C when installing the name plate. If the working environment is below 20°C, heat the installation area of the body to 20 to 30°C and then install the name plate.

B0040TUC01
*A for GRMN - -
*1 NO. 1 BACK DOOR EMBLEM *2 NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
● Non-reusable part - -
B0040TDC01
*A for GRMN - -
*1 BACK DOOR ORNAMENT *2 SYMBOL EMBLEM
B0040T5C01
*A for GRMN *B for LH Side
*C for RH Side - -
*1 FRONT FENDER EMBLEM - -
● Non-reusable part - -

  1. FRONT FENDER EMBLEM (for GRMN)


    1. for LH Side:

      B0040SQC01
      Installation Position:
      Area Measurement Area Measurement
      A 127.5 mm (5.020 in.) B 51.9 mm (2.043 in.)
      C 305.1 mm (12.012 in.) - -

    2. for RH Side:

      B0040TFC01
      Installation Position:
      Area Measurement Area Measurement
      A 36.0 mm (1.417 in.) B 159.1 mm (6.264 in.)
      C 308.4 mm (12.142 in.) - -

  2. NO. 1 BACK DOOR EMBLEM (for GRMN)

    B0040TTC01
    *a Reference Values *b Edge of Back Door Panel
    Installation Position:
    Area Measurement Area Measurement
    A 40.9 mm (1.610 in.) B 55.7 mm (2.193 in.)
    C 74.3 mm (2.925 in.) - -

  3. NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE

    B0040TLC01
    *a Reference Values *b Edge of Back Door Panel