REAR FLOOR SIDE MEMBER CUT AND JOIN REPLACEMENT SECTIONS



  1. REMOVAL

    Symbol meaning
    A0044G9 Remove Weld Points
    A0044D4 Remove Weld Points
    A0044D0 Cut and Join Location

      REMOVAL POINT

    1. After removing the floor side rail panel FR, remove the rear floor side member or rear floor side member front.

    A003PTEE02

  2. INSTALLATION

    Symbol meaning
    A0044GL Plug Weld
    A0044D8 Plug Weld
    A0044GJ Butt Weld

      INSTALLATION POINT

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    2. After welding the rear floor side member or rear floor side member front to the vehicle side, install the floor side rail panel FR.

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A003Q1OE01
    *1 for TMC Made: REAR FLOOR SIDE MEMBER
    *2 for TMMF Made: REAR FLOOR SIDE MEMBER FRONT
    *3 FLOOR SIDE RAIL PANEL FR