QUARTER WHEEL HOUSING OUTER PANEL(for 3 Door) ASSEMBLY REPLACEMENT



  1. REMOVAL

    Symbol meaning
    A0044G9 Remove Weld Points
    A0044EJ Remove Weld Points
    A0044D4 Remove Weld Points
    A0044D0 Cut and Join Location

      REMOVAL POINT

    1. *1 and *2 is reused.

    2. After removing the *1 and *2, remove the quarter wheel house panel outer.

    A0044FAE03
    A0044ETE01
    *1 QUARTER WHEEL HOUSE PANEL OUTER
    A0044EHE03
    A0044G4E01
    *1 QUARTER WHEEL HOUSE PANEL OUTER

  2. INSTALLATION

    Symbol meaning
    A0044FS Spot Weld
    A0044GL Plug Weld
    A0044FF Plug Weld
    A0044D8 Plug Weld
    A0044GJ Butt Weld
    A0044DZ Body Sealer
    A0044F9 Assembly Mark

      INSTALLATION POINT

    1. When welding *1, make a hole on a new part for plug welding and weld the panel with the panel behind completely.

    2. For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.

    3. Before installing a new part, apply body sealer.

      Tech Tips

      Apply body sealer in an even, continuous bead.

    4. After welding the quarter wheel house panel outer and quarter trim retainer lower to the vehicle side, install the *2 and *3.

    5. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    6. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A0044CCE01
    A0044CIE01
    A0044FCE01
    A0044FTE01