UNDER BODY THREE-DIMENSIONAL DISTANCE
Tech Tips
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Radiator Lower Support Standard Hole | φ18 (0.71) |
| B, b | Front Bumper Reinforcement Installation Nut | M10 (0.39) |
| C, c | Front Side Member Standard Hole | φ18 (0.71) |
| D, d | Front Suspension Crossmember Installation Nut | M12 (0.47) |
| E, e | Front Suspension Crossmember Installation Nut | M14 (0.55) |
| F, f | Torque Front Box Standard Hole | φ25 (0.98) |
| G, g | Front Floor Pan Standard Hole | φ18 (0.71) |
| H, h | Front Side Inner Rear Member Standard Hole | φ18 (0.71) |
| J, j | Front Floor Pan Standard Hole | φ18 (0.71) |
| K, k | Floor Side Inner Rear Member Standard Hole | φ18 (0.71) |
| L, l | Trailing Arm Installation Hole | φ15 (0.59) |
| M, m | Rear Floor Side Member Standard Hole | φ18 (0.71) |
| N, n | Rear Spring Plate Standard Hole | φ18 (0.71) |
| O, o | Rear Floor Side Member Standard Hole | φ18 (0.71) |
| *1 | Front |
| *2 | Distance between points other than those to the left |
| *3 | mm (in.) |