WHEN REMOVING,INSTALLING,REPAIRING OR REPLACING PARTS REPAIR PROCEDURE OF HEADLIGHT ASSEMBLY

Tech Tips


  • If only the installation area of the headlight is damaged, use a repair bracket for a low-cost repair.

  • Ensure that other areas of the headlight are not damaged.


  1. INSTALL HEADLIGHT PROTECTOR UPPER RETAINER


    1. A003Q28

      Cut off the portion indicated by the hatched lines in the illustration and smooth the surface with sandpaper.

      Note

      After cutting off the hatched lines, place the headlight protector upper retainer against the bosses and gradually file away the hatched lines until installation is possible.

    2. A003PSY

      Install the headlight protector upper retainer with the 2 screws.

  2. INSTALL HEADLIGHT PROTECTOR LOWER RETAINER


    1. A003Q3L

      Cut off the portion indicated by the hatched lines in the illustration and smooth the surface with sandpaper.

      Note

      After cutting off the hatched lines, place the headlight protector lower retainer against the bosses and gradually file away the hatched lines until installation is possible.

    2. A003PXX

      Install the headlight protector lower retainer with the 3 screws.