UNDER BODY THREE-DIMENSIONAL DISTANCE

Tech Tips


  • In cases in which only one dimension is given, left and right are symmetrical.

  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)
A, a Radiator Support Lower Standard Hole φ18 (0.71)
B, b Crash Box Installation Hole φ6.3 (0.25)
C, c Front Side Member Standard Hole φ18 (0.71)
D, d Front Suspension Member Installation Nut M12 (0.47)
E, e Front Suspension Member Installation Nut M14 (0.55)
F, f Torque Box Front Standard Hole φ25 (0.98)
G, g Front Floor Pan Standard Hole φ18 (0.71)
H, h Front Side Inner Rear Member Standard Hole φ18 (0.71)
J, j Front Floor Pan Standard Hole φ18 (0.71)
K, k Floor Side Inner Rear Member Standard Hole φ18 (0.71)
L, l Trailing Arm Installation Hole φ15 (0.59)
M, m Rear Floor Side Member Standard Hole φ18 (0.71)
N, n Rear Spring Plate Standard Hole φ18 (0.71)
O, o Rear Floor Side Member Standard Hole φ18 (0.71)
A005FKCE01