BACK DOOR THREE-DIMENSIONAL DISTANCE
Tech Tips
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Back Door Hinge Installation Hole | φ16 (0.63) |
| B, b | Rear Upper Side Inner Corner Panel Standard Hole | φ10 (0.39) |
| C, c | Quarter Panel Standard Hole | φ13 (0.51) |
| D, d | Roof Side Inner panel/Lower Back Upper Retainer Adjoining Portion | - |
| E, e | Finish Plate Installation Hole | φ8.5 (0.33) |
| F, f | Back Door Lock Striker Installation Nut | M8 (0.31) |
| G, g | Rear Shock Absorber Installation Hole | φ18 (0.71) |
| H | Rear Seat Installation Standard Hole | φ9.3 (0.37) |
| h | Rear Seat Installation Standard Hole | 13X9.3 (0.51X0.37) |
| J | Rear Seat Installation Hole | φ18 (0.71) |
| K, k | Center Body Pillar Assembly Mark | - |
| *1 | Distance between points other than those above |
| *2 | mm |
| *3 | (in.) |