REAR FLOOR SIDE MEMBER CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)



  1. REMOVAL

    Symbol meaning
    A005FLT Remove Weld Points
    A005FG3 Remove Weld Points
    A005FF2 Cut and Join Location

      REMOVAL POINT

    1. After removing the floor side rail front panel, remove the rear floor side member.

    A005FKBE01

  2. INSTALLATION

    Symbol meaning
    A005FJF Plug Weld
    A005FIX Plug Weld
    A005FGA Butt Weld

      INSTALLATION POINT

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram)

    2. After welding the rear floor side member to the vehicle side, install the floor side rail front panel.

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the paint / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A005FEVE01
    *1 Floor Side Rail Front Panel